Self-propelled grain cleaning complex SZK-CAD-10, SZK-CAD-15, SZK-CAD-30
FEATURES
- convenience of operation of SZK CAD in open and closed rooms;
- SZK CAD reduces all the operations to clean grain to one, at times simplifying the processing of grain, saving the agrarian forces and time;
- low power consumption;
- universality;
- rapid change of crops and grain cleaning regimes;
- one operator service
- maneuverability and ease of control.
PRODUCTIVITY
| MODEL | SZK-SAD-10 | SZK-SAD-15 | SZK-SAD-30 |
| Cleaning regime up to (t/h) | up to 10 | up to 15 | up to 30 |
| Calibration (t/h) | up to 5 | up to 7 | up to 10 |
| Power (kWh) | 12 | 14 | 16,5 |
| Mass (kg) | 1510 | 1580 | 2400 |
| Overall dimensions (L W H) | 5080×4550×3400 | 5080×4550×3400 | 9020×4690×4300 |
PURPOSE
Grain cleaning complex is designed for cleaning and calibration of any grain in conditions of current, warehouse, where it is necessary to load grain from a shoe or big-bag and take off the ready-made clean material and waste. The self-propelled complex is the best solution for post-harvest cleaning and grain calibration.
▶ THE SZK СAD PACKAGE CAN BE CHANGED ACCORDING TO YOUR DESIRE AND UNDER YOUR CONDITIONS
PRINCIPLE OF OPERATION
Through the scraper loader the grain from the collar enters the hopper-feeder of the separator СAD. Then, from the bunker by the vibrating chute, the grain enters the separation chamber uniformly, where it is processed by the generator jets. The purified or calibrated grain falls into 2-3 fractions and is then transported by the norie to a separate bunk or trailer. Waste, seedy and crushed seeds from 4-5 fractions are separately taken away by the auger to the side. The cyclone serves to trap dust. The minimum number of lubrication points makes the design reliable and safe when used.